RP30 Advanced Battery
Charger - Specifications
|
|
| Home | RP30 | Specifications | Price
List | Enquiry
form |
| Size (w x h x d) |
550 x 140(max) x 165mm |
| Construction |
Steel Case, Black powder coated with rear Keyhole slots for
wall mounting, 4 base mounted rubber feet |
| Capacity |
6 Nicad or NiMH battery packs |
| Power supply |
220V/110V (specify at time of ordering) |
| Power Consumption |
130VA max |
| Mains Connection |
3 pin Euro/IEC style plug |
| Battery Charge Current |
1200mA max per battery |
| Charge Rate |
1C charge, i.e a battery will charge in 1 Hour, the charge
rate is also internally selectable for 4,2,0.5C charge rates which can be specified at
ordering time. |
| Indicators |
Red led for battery fault, green for charging/charged, mains
on neon indicator. |
| Front panel Controls |
Reset/Start charge switch, Mains on switch on Right side
panel |
| Cooling |
The unit is provided with cooling slots in the base and a
cooling fan, to comply with health and safety requirements this only operates when a
battery is inserted and on charge |
| Holding charge |
The batteries receive a conditioning charge of 0.05C when
fully charged and can be left in the charger indefinitely. |
|
|
| RP30 220V AC |
|
|
| Introduction
Specifications Price List Manual Send an Enquiry Send an E-mail Enquiry Back to Home Page |
|
This information contained on this web
site is believed to be accurate. However, no responsibility is assumed by Karter
Electronics for inaccuracies, changes or enhancements which may be introduced.
Last updated 16 August 2001,
Copyright Karter Electronics 2000
|