Simpeater - Specifications
Home  |  Simpeater |  Specifications |  Price List  |  Data sheets  |  Enquiry form
ELECTRICAL
Voice storage Non volatile memory cells
Microprocessor Clock Speed 4MHz
Supply Voltage Better than 8 to 18 Volts DC
Supply Current Less than 10mA Standby
Less than 45mA Recording
Less than 110mA Playback
Receive Level 10mV to 8Volts Peak to Peak
Transmit Level 10mV to 2Volts Peak to Peak
COR Input Active State Positive or Negative
Level Change Less than 100mV
Hold Period Link Selectable - 0.25, 0.5, 1 and 1.5 seconds
Transmitter lead in delay 150mS
Distortion Less than 2.5%
Frequency Error Less than 0.5% per message
Less than 2.5% across full temperature range
Frequency Response 60 Second Better than 300hz to 3.4KHz +/-3dB
90 Second Better than 300hz to 2.3 KHz +/-3dB
Signal to Noise Better than 45dB
Low pass filter Better than 6dB per octave
Temperature Range -10.C to +50.C
PHYSICAL
Construction Two part steel case with internal PCB
Dimensions 220mm x 178mm x 33mm
Front Panel Power On Off switch
Power - Green LED
Carrier -Yellow LED
Transmit - Red LED
Connections 14 way screw terminal plug and socket
Tx Level Level jumper and potentiometer
Rx Level Level jumper and potentiometer
Carrier Phase Jumper and threshold potentiometer
AGC(Automatic Gain Control) Jumper Selectable ON or OFF
Carrier Hold Four jumper Selectable settings
Fittings 4 adhesive feet are provided for desktop operation
OPTIONS 60 or 90 second recording duration
U mounting bracket
A range of radio specific connection leads
Introduction  Specifications  Price List  Manual  Application notes  Send an Enquiry  Send an E-mail Enquiry  Back to Home Page
This information contained on this web site is believed to be accurate. However, no responsibility is assumed by Karter Electronics for inaccuracies, changes or enhancements which may be introduced.
Please send any comments or problem reports to:webmaster@karterelectronic.demon.co.uk
Last updated 16 August 2001, Copyright Karter Electronics 2000